The economic advantage of reselling or consuming the electricity produced is not the only advantage of ENEFCOGEN products. The following points should be considered carefully :

Flexibility

Eneftech products have the unique ability to absorb a variation of about 50% of the input heat source. These products have been specially designed to meet the field needs and hence correspond to what is actually found in many plants.
The ENEFCOGEN units can therefore adapt to a variable heat source to achieve up to 30% of the nominal power. The electricity and heat production will of course vary according to a similar ratio.

Modularity

ENEFCOGEN units can be paralleled and hence allow an installation to grow as required. For example, three ENEFCOGEN GREEN units of 30kWe paralleled, will deliver 90kWe (3x30kWe). This allows an installation to be dimensioned for a specific need and then, in case of an increase in energy requirements, to be adapted with additional units. In this case, the number of units functioning at a given moment must correspond to the energy requirements. In other words, all the units will adapt to the heat source, as individual units would do.

Compact

The ENEFCOGEN is very compact. It occupies 1 m2 to 2 m2 of floor space depending on the model. 

100% renewable cogeneration

The ENEFCOGEN unit can be coupled to a heat source whose energy comes from the sun or biomass. The electricity and heat produced are hence 100% renewable.

Recovery of Waste Heat

The thermal wastes are converted into electricty and the energy initially used to dissipate heat through aerotherms is saved.

Low maintenance

The sealed design of ENEFCOGEN units, and a low number of moving parts have resulted in a low need for maintenance and increased lifetime.

Acoustic comfort

Due to their innovative and powerful technology, the ENEFCOGEN units are silent. This feature allows an eased implementation of Eneftech products, without the need for dedicated facilities.

Improving the energy balance

Cogeneration allows distributed power production. Using the powerful ENEFCOGEN units adapted to the consumer’s needs, it is possible to optimize the production of electricity and heat (see diagram below). The consequent reduction of CO2 allows to further improve the energy index of the building.